RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd ..........................

["'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

It’s the Official MoPar “Clunk”!

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of RICK AND DEBBIE CLAPHAM rixpac@xxxxxxx [Chrysler300]
Sent: Monday, June 08, 2015 8:15 PM
To: David Schwandt; 'Marshall Larson'; chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd ..........................

 






I would say it would be more like a chime.
 

  _____  

To: granitledge@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
From: Chrysler300-noreply@xxxxxxxxxxxxxxx
Date: Mon, 8 Jun 2015 12:32:59 -0500
Subject: RE: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd ..........................

  

I believe it is somewhat normal, All my Chrysler products w/ball and trunion joints have done that IIRC.

Not to worry. It think it is the fore and aft action of the B&T that is responsible for the sound/noise

Does it do this under WOT acceleration?

If so, THEN THAT would be a problem

IMHO only, your mileage will vary I’m sure

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Marshall Larson granitledge@xxxxxxxxx [Chrysler300]
Sent: Monday, June 08, 2015 10:58 AM
To: 300
Subject: Re: [Chrysler300] Transmission "clank" sound moving between 2nd and 3rd ..........................

​Perhaps a worn U-joint or Trunion with lots of slack.

On Fri, Jun 5, 2015 at 2:06 PM, Chrysler300E@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Good day to everyone out there in 300 Land!

On my 300E which runs fine, for some time I have had a "clank / clunk" 
sound when the car moves / shifts between 2nd and 3rd gears but only when I 
don't apply gas and don't accelerate at a normal pace. When I move at a 
normal pace and it shifts, there is no sound! Can it be a bushing / 
transmission mount of some sort that is worn as there is no slippage or anything in 
the transmission!

Thanks to any and all responses in advance!

Sincerely,

Tom
Miami, FL

[Non-text portions of this message have been removed]

-- 

Marshall Larson

[Non-text portions of this message have been removed]












[Non-text portions of this message have been removed]



------------------------------------
Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/