Re: [Chrysler300] Chrysler 300H idle speed

Not sure what you mean by 'marginal'. Does the car run rough and act like it's gonna stall ? If so, I would attach a vacuum gauge to the intake and see what's going on. Problem is either a vacuum leak, or something is out of whack in your carbs. It's not Ethanol gas.

Ron

----- Original Message -----

From: Michael Moore mmoore8425@xxxxxxx [Chrysler300]

To: Mike Moore

Cc: chrysler300@xxxxxxxxxxxxxxx

Sent: Saturday, October 24, 2015 12:30 PM

Subject: [Chrysler300] Chrysler 300H idle speed

What idle speed are the 300H folks setting? Although my manual says 650, it sure is marginal at that speed. 800 feels better, but I don’t understand what causes the difference. Ethanol?

Thanks,

Mike Moore

300H

On Oct 24, 2015, at 7:49 AM, Robert Augliera raugliera@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Does anyone have tips on replacing a windshield on a 61 Chrysler. Lots of chrome to remove.

Thanks

Rob

__._,_.___

Posted by: "Ron Waters" <ronbo97@xxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___