Re: [Chrysler300] 300H rough idle/ now about car "locking up".

["Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Thank You Henry, I have also been thinking it may be transmission related-there is nothing   else. The front u joint is fine. I checked it yesterday.
Thanks, Mike Moore
300H

> On Nov 21, 2015, at 6:01 AM, Henry Schleimer <henry.schleimer@xxxxxxxxxxxxxxx> wrote:
> 
> Firstly I’d say this is probably not the reason for your problem.  However, a similar thing happened in my Australian Valiant at a shopping centre car park no less.  The Borg Warner auto finally gave up the ghost and it commonly fails, I found out later, by not releasing a band or clutch (forget which one) when it is supposed to.  Basically the transmission locks up internally.  Lots of revs got me reversed out of my parking space (like the brakes were locked) but it would let me drive forward.  Solution was a replacement box.
>  
> Don’t forget that auto bands and clutches can fail as well.  Easy to check by jacking up the rear axle and putting in gear.
>  
> Regards
>  
> Henry 
>  
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Michael Moore mmoore8425@xxxxxxx [Chrysler300]
> Sent: Saturday, 21 November 2015 6:46 AM
> To: Mike Moore
> Cc: Chrysler 300 Club Int. Server
> Subject: [Chrysler300] 300H rough idle/ now about car "locking up".
>  
>   
> Some time ago, I moved my car in my garage and it locked up as though it had hit something when I moved either forward or backwards a couple of feet. 
> 
> Because I HAD to move it, I gave it gradually increasing amounts of throttle and it did move as though I were driving through locked brakes. 
> 
> Here’s where things are now:
> 
> 1. Removed both rear drums, and found both rear brakes were normal (they were rebuilt a couple of years ago.) 
> 
> 2. Removed drive shaft and found a rear u-joint was worn but showed no signs of anything locking up.I could turn the diff input shaft either direction without a problem. 
> 
> 3, The diff was shipped to Randy’s for disassembly, inspection and rebuild . It was in good shape except the Power Grip clutch pack was worn (350,000 miles). 
> 
> 4. I spent a long time on the phone with Jeff Carter (who sold me replacement axles as mine were stripped or worn on the taper),and he suggested I check out the e-brake more throughly. I just now pulled that drum, and it looks just like it did when I put it together several years ago with new lining. It is also not my smoking gun. 
> 
> 5. Jeff Carter suggested I check for a broken trunnion pin on the front U-jpint, which I will do. 
> If it still does this (no reason found not to!) , I plan on cycling buttons on transmission between 1 and D as that is a different fluid path and may show something.
> If anyone has any further suggestions , I would sure be grateful!
> 
> Thanks, 
> MIke Moore
> 300H 
> 
> J
> 
> 



------------------------------------
Posted by: Michael Moore <mmoore8425@xxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/