Re: [Chrysler300] 62 Power steering pump bracket

["Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Larry, Thanks!

I am going to do the same thing, but I will order one or two from Gary.

Do you cut the hose to be flat and unroll it to be the thickness? 

Mike Moore

On Feb 19, 2016, at 6:55 AM, Larry Jett <larrywjett@xxxxxxxxx> wrote:

For 30 years I have cut a 2 inch piece of heater hose and smooshed it down the crack in a dozen cars.  Works........cheap........

Larry Jett        For Lent, I decided to quit all my bad habits........but then remembered no one likes a quitter.

 

                                                                     

On Fri, Feb 19, 2016 at 6:18 AM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

 

yes, that is available from Gary Goers.

Part number 255.

$3.10/ea in catalog #10, may be higher now.

I know he had an increase, I don't know how much

so I over pay and he refunds, all is fair.

 

 

------ Original Message ------

From: "Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>

To: "Mike Moore" <mmoore8425@xxxxxxx>

Cc: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx>

Sent: 2/19/2016 8:53:02 AM

Subject: [Chrysler300] 62 Power steering pump bracket

 

 

There is a rubber bumper located between the two parts of this bracket.
Does anyone know if they are available and if so where?
Thanks you,
Mike Moore
300H

__._,_.___

---

Posted by: Michael Moore <mmoore8425@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___