[Chrysler300] Strut / Torsion bars

["charlies@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Group,

Last year I installed a factory sway bar on my 62 Sport. In discussion with Dave Dumais at the MaCunngie meet, he said that it was likely that the strut rods on the donner (Newport) car were likely larger dia. Upon inspection, I found that this was indeed true. My current strut rods measure approx. .015 smaller than the Newport.

Also, a measurement of the torsion bars also reveals a difference. My Sport measures approx. 970 dia. and the Newport at approx 1.010 dia. 

So the question is - Would it be worthwhile to swap out these parts to my Sport. I guess I'm wondering what difference, if any, would I notice in ride quality / handling. 

Thanks, Charlie in Ottawa

 

 

__._,_.___

---

Posted by: charlies@xxxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___