|
Marv,
Try contacting Larry Jett. I remember he was
looking for a C on his side medallion that said good-bye on his Gaugin
convertible years back. Somehow he got the letter and affixed it so that
he could sell it to Jeff Miklas! By the way, when I replaced my side
bezels, etc., I used the small fasteners and epoxied over them not for rattles
but as insurance against what Larry had experienced. To this day after
driving my C I always glance at my side letters to see if they stayed with me or
fled for a divorce! I guess that is one of those subliminal issues that
makes my pulse race when lifting the door to the storage garage when taking
Mopsy out! 300’ly, Rob Kern
Sent: Friday, July 08, 2016 4:10 PM
Subject: [Chrysler300] 1957,58,59 300 side ornamentation letter and
number retention
To any C, D or E members who
have had to secure the numbers and letters to the side quarter plastic
disc. I have searched but have not been able to locate the small tinnerman
like clips that hold the cast numbers and letter to the plastic red white and
blue disc. I can epoxy them but without some mechanical hold onto the pins
I fear they will only break lose. I have ordered numerous clips and
push-ons but with so small a height to the pin I can't get any to hold.
Anyone else have a similar experience. And thanks to all who responded to
my last question. Marv Raguse....57 and 58 300s... __._,_.___ Posted by: "Rob Kern" <robkern@xxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap