[Chrysler300] Power Steering Repair

["Donald Nissen fast-ace@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi All,   I received a rebuilt PS pump, removed my old one & am in the 
process of installing my old fluid tank onto the rebuilt one. Both 
mounting bolts had gaskets which were well sealed and glued down with 
something.I made new gaskets. My question is: what's the best sealant 
for the job? I come from the permatex era, but there must be something 
more modern that is unaffected by the oil - or not? This is a job I 
never wish to repeat. Chrysler stuck the air conditioner compressor on 
top of everything leaving only a tiny space to get at the bolts. Any 
thoughts on correct sealant greatly appreciated.

Don Nissen  300K




------------------------------------
Posted by: Donald Nissen <fast-ace@xxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/