[Chrysler300] Ammeter

["lowtax@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hello All,

I took my 300F in to my mechanic to get some repairs.  When I got the car back, I noticed that the ammeter was not working.  The needle is positioned all the way to the left (discharge) side and does not move no matter what position the ignition is in or whether or not the motor is running.  All I had done to the car was to repair the windshield washer system, new exhaust manifold and intake manifold gaskets and to try to get the heater vent to open and close when necessary.
I had JC Auto Restoration restore the gauge cluster a couple of years ago and everything has worked fine up until now.
Could the gauge have gone bad?  Is there anything else that I should check for before removing the gauge?

Thank you,

Fred Grossi
Arroyo Grande, CA

__._,_.___

---

Posted by: lowtax@xxxxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___