Agree w John .. Jump vacuum switch and try and jump neutral switch to ground and try . Vacuum switch is a little dicey on these cars. Have also seen wiring mixed up at start relay to vacuum switch but itvwas working right?
Sent from my iPhone
On Aug 3, 2016, at 11:33 PM, 'John L. Chesnutt' chesnutt@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com > wrote:Hi Jeff,
You need to first check:
1. The Neutral Switch located on the outside of the transmission.
2. Vacuum Switch on the intake manifold
I don’t think your starter button switch is the problem.
John – Portland, OR - Owned our 300C for 58 years.
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@
yahoogroups.com ] On Behalf Of ldmiklas@xxxxxxxxxxx [Chrysler300]
Sent: Wednesday, August 03, 2016 7:34 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Need help: 300C starter button fail
Hi all
The starter button/neutral button in my C fails to engage the starter. Jumping the relay starts the car fine, so I
can only assume the button is the problem.
Is my next step to pull the shift button assembly or is there a simpler attack ? Any insight greatly appreciated !!
Thanks !
Jeff Miklas - ldmiklas@xxxxxxxxxxx
__._,_.___