|
There's a good chance the back up light plug-in was pulled out during the headlight switch change. See if there's current going to the back up lights, with "R" button pushed... if not, try looking under the dash around the push button mechanism. The back up light wires are plugged into the B/U light switch located on the side of the mechanism... Good luck. Jean-Yves. From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: August 28, 2016 12:47 AM To: chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] 300G Backup Lights They not working after just having a new headlight switch installed. Is it reasonable to think the backup light wires may have been knocked loose from the back of the push button housing in the process ? I'm
pretty sure they were working prior to this.
Thanks,
Val Jeffers
__._,_.___ Posted by: Jean-Yves Chouinard <jymopar@xxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap