Re: [Chrysler300] radiator rebuild/ freeze out plug ???????????'s

["Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Noel,

If you want that generator restored by a really capable company whom I have used many times with success (and at very reasonable prices) you might check out Adema's here in Coopersville, MI.

http://ademaelectric.com/

I'll be in Chicago on 11/16 - 17, and would gladly take it back with me if that is an appealing idea.

Keith Boonstra

-

On Thu, Oct 27, 2016 at 6:43 PM, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hi Steve,

I had my radiator re-cored last winter by a shop that does vintage style radiators. Cost was about $450. Car definitely runs cooler now. 

As for your freeze plug issue, are you referring to the freeze plugs in the block and cylinder heads?  You may want to reach out to John Begian, as he blew two of his freeze plugs early this summer - 1 at Holland Meet, and 1 a week later. He replaced all of them. He can probably give you some tips on this. 

My generator is out of the car again - ate another rear armature bearing. Thinking the generator case might be slightly warped. 

Noel 

Sent from my iPhone

On Oct 27, 2016, at 10:03 AM, Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com> wrote:

 

Hi 300 ites,

had the F up on the lift today and it appears that the lower radiator needs help, ie looks like it needs rebuilt, core looks OK. Any thoughts on who might work on radiators?

It also looks like the front freeze out plug on drivers side has been leaking in the past. No evidence it is leaking now but needs replaced. No way to put the curved plug in. Some discussion by club members  in the past on screw in types? Where to get them etc.  This was a precheck for the F  in hopes to drive it to the 2017 Spring meet in upstate NY next year.

Any help would be appreciated.

 Thanks and go Indians

Steve Beard

300f

Delaware, Ohio 

__._,_.___

---

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___