It is always great to have a specific solution or answer to a member’s
question. New member Harry Torgeson has posed some good questions to guide his
300K restoration to factory correct. Attaboy, Harry!
I have enjoyed
tracking and participating in this thread so was disappointed to see that the
tag on the RH head of my A/C compressor was significantly different than John
Holst’s original and the vendors’ OEM replacement tags. Then I saw the
compressor head and bolting were different also. See attached for the tag on
the RH cylinder head of my 300K (which still has a later 383 in it). So, I
went around the car to the other side and saw a somewhat boogered-up version
of the OEM tag (also attached). I’ll replace it with a nice, new one—but from
the $12 e-Bay vendor, not the $16.88 one.
Now, I’m wondering if some
or all other Chrysler A/C compressors have this tag bolted to the RH head. (in
addition to the red-printed tag on the LH head). It is angle-cut on each end
with holes for two of the head bolts. It reads as
below:
_____________________
/ CHRYSLER CORP. \
/
\
/ MODEL 3925070101 \
\ SERIAL NO. 630927 /
\ PART NO.
2465232 /
\____ REFRIGERANT ___12_/
I Googled “2465232
compressor” and got hits in the ’64 and ’65 Parts Manuals but could not find
any part with that number. Whatzit? The tag is made with all characters
stamped into the aluminum and no color printing. It could be a re-builder’s
tag.
Rich Barber
Brentwood CA (Windy—the weather,
also)
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of John Holst jholst@xxxxxxxxx [Chrysler300]
Sent:
Wednesday, January 18, 2017 2:47 PM
To: MARK HOPKINS mailto:m.hopkins@xxxxxxx
Cc: chrysler300@xxxxxxxxxxxxxxx
Subject:
Re: [Chrysler300] A/C metal plate rquest
Mark and all. We have a
winner. The link below and Ebay are identical and the same as on my 64 K. I
would have guessed that this was a wild dream., but I was wrong. This works
for 62-75 or so. Would have to check earlier cars to see what else is
available. John Holst...
At 04:33 PM 1/18/2017, you wrote:
Also
available here: http://www.moparmall.com/A-C-Compressor-Tag-for-1962-1966-MoPar-C-Body-Im-p/839-277_a.htm
Mark
_____
From: "cbilter@xxxxxxxxx [Chrysler300] mailto:cbilter@xxxxxxxxx%20[Chrysler300]
" <Chrysler300-noreply@xxxxxxxxxxxxxxx
mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx
>
To: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx mailto:Chrysler300@xxxxxxxxxxxxxxx
>
Sent: Wednesday, January 18, 2017 2:57:35 PM
Subject: RE:
[Chrysler300] A/C metal plate rquest
John and all – the tag is
reproduced and is on ebay as well as oother sites. Note there are several
styles (depends on the year). Pay attention to the “max charge†values.
The reproduction tags have the orange color lettering. These are correct for
perhaps ’65 up (not sure of start year). 1962 and 1963 had red lettering. A
later style is better than a missing tag IMHO.
http://www.ebay.com/itm/NOS-MOPAR-ORIGINAL-A-C-COMPRESSOR-TAG-CHRYSLER-DODGE-72-71-70-69-68-67-66-/122298920180?hash=item1c79956cf4:g:A2EAAOSwT6pVkfgq
<http://www.ebay.com/itm/NOS-MOPAR-ORIGINAL-A-C-COMPRESSOR-TAG-CHRYSLER-DODGE-72-71-70-69-68-67-66-/122298920180?hash=item1c79956cf4:g:A2EAAOSwT6pVkfgq&vxp=mtr>
&vxp=mtr
Carl B.
From: John Holst jholst@xxxxxxxxx mailto:jholst@xxxxxxxxx
[Chrysler300]
Sent: Wednesday, January 18, 2017 2:41 PM
To: chrysler300@xxxxxxxxxxxxxxx mailto:chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] A/C metal plate rquest
A club member has
asked if there is a source of the metal plate attached to the top of the A/C
compressor. We have found the other decals for the engine (air cleaner and
coolant) but this is different and probably would have to come off a donor
car. Any ideas? John Holst...
Do you no where to get the air
conditioning spec psi plate?
Harry Torgeson <torg66@xxxxxxxxx mailto:torg66@xxxxxxxxx
>
[Non-text portions of this message have been
removed]
[Non-text portions of this message have been
removed]
Back to the Home of the Forward Look Network
Archive Sitemap