Hi, We have been working on a kit to repair the often missing black washer button on F,G H , maybe others , those with a black push button in the center of the wiper speed switch. Noel was the trial case, we learned lot..thank you Noel. I think he found a whole replacement while all this was evolving, but a big thank you is due for patience . The kit includes a new machined button , new push shaft , hardware and instructions; takes some patience and skill to do, but not hard at all , once the switch is out. In instruction is how to convert an F to an electric pump switch too—(not that any of them need that)….but you need the white colored washer switch only , from a 61 up (on back of wiper switch) , even if donor button shaft is broken off at front , that is OK. . Later on may be a kit with a micro switch for that conversion . We also have a kit to repair C, D and probably E door handles so you can rechrome them, including a new handle preload spring , and a set of hardware to replace the rivets , 50$ each handle 35$ plus shipping for wiper button kit. Thanks to all , John __._,_.___ Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |