Re: [Chrysler300] Ram K brake pedal

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi , 

Do not know about ramK due to complexity of hydroboost behind this question ; probably work either way, but only one is factory right . But on manual brakes without hydroboost the master is higher not lower , as top pivot is fixed. 

to get more pressure for a given bore , you raise it . It is almost 2:1 different in 60's F / dodge etc 

Sent from my iPhone

On Jul 12, 2017, at 12:46 AM, leslie miklas ldmiklas@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Quick question:

I used to know the answer to this but have forgotten...(Insert old age joke here)

The 64 300s with manual brakes used a different (lower) hole location to attach the master cylinder pushrod to the brake pedal as well as a different firewall support plate than the power brake equipped cars.

My question: Do the Ram Ks  use the MANUAL  brake pedal  pushrod position and related support plate ?

I assume they do ! 

Thanks !

Jeff Miklas - Ldmiklas@xxxxxxxxxxx

__._,_.___

---

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___