Re: [Chrysler300] 300 G A/C

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Just quickly, pressure readings do not tell you charge level, but I agree throwing in one can like that --if you know for sure low can fix it. If it is not low you can overcharge , = disaster . The only way to correctly charge is by weight of refrigerant and a scale -which they do in an empty system or first pull out what is in there with suction  AC machine     ( a law now) . Excess liquid refrigerant is kept in the car receiver / dryer tank , by design . 

It is like a propane tank . Pressure is the same almost empty or full . Pressure is Set only by temp of propane ,or refrigerant  not by how much is in tank .. for things that are liquid at room temp under pressure , but change to gas  if pressure drops . Why gas comes out in your grill , not liquid . And flame stays about the same size ( same pressure) as the liquid tank empties on a  hand held propane torch . And gets cold. Straight compressed gas ( oxygen) non liquified yes pressure tells you % full in cu ft . 

Somewhere in FSM is weight in oz of new charge .. about 2 cans + usually. By way of understanding , not critique . 

Sent from my iPhone

On Aug 24, 2017, at 5:08 PM, Ray Jones 1970hurst@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Go to Walmart*, there you will find a 134-A refill kit.

It consists of a can of 134*A, a gauge, hose and handle.

Hook it up to your system, Will only attach to one connector.

Follow directions (Nobody will see you doing it)
What you want to do is watch the gauge and see what the pressure is while it's running.

If it's low, pull the trigger and add Freon until it gets the pressure up to the range it wants.

The gauge has the ranges marked on it, so it's easy. 

When finished, but the rig in you tool box for future use, you can add more bottles when you need them, I get them on sale @ $3.85 or less @ Atwoods.

If you have a 2 gauge pro system, look for the pressure to be 1/2 ambient air temp on the low side and double or more on the high side. Some charts I just looked at are showing pressure to be triple ambient air temp.
And of course you add Freon thru the gauges.

On Thu, Aug 24, 2017 at 3:44 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

My understanding is that R-134 refrigerant has different thermodynamic properties and expands to a somewhat higher temperature than does R-12 from a given pressure.  Newer cars adjust for that with larger evaporator coils and flow rates to achieve cooling but the outlet air temperature will never be 40F again.  The capillary expansion tube is no-doubt different, also.  Our ’99 Wrangler FA/C starts cooling immediately.  Our ’05 Durango starts cooling slowly but eventually gets the job done.  Both use R-134.

 

No doubt, R-12 was a great refrigerant for cars.  Eventually, nearly all refrigerants will be vented to atmosphere.  Some may be broken down but the chlorine will still go to the atmosphere and break down the ozone (O3) layer (or so they say).  Changeover was on or about 1-1-94.

 

Rich Barber, BSME

Brentwood CA

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@yahoogroups.com] On Behalf Of Val Jeffers edward1108@xxxxxxxxx [Chrysler300]
Sent: Thursday, August 24, 2017 10:38 AM
To: Chrysler 300 List <chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] 300 G A/C

 

 

Greetings,

               The service manual states 45 ounces of R12 Freon is the capacity. My question is, since converting to R134 several years ago, is that still the correct number ? I think mine is running low and want to recharge as it is blowing cool but not cold as it should be.

 

                                                                                Thanks,

 

                                                                                Val Jeffers

 

            

 

Virus-free. www.avast.com

--

Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

---

Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___