RE: [Chrysler300] 61 300G

Michael,

If the trunk gasket is bad or the lid not adjusted properly, it will leak. They are known for that, it's one of the reasons I avoid washing my G with copious amounts of water and use a detail spray instead. Convertibles also have an issue with water getting in the area below were the top meets the body at the quarter panel, but that's another story. Gasket fit can be checked with a piece of paper (dollar bill) between the lid and the gasket. Many '61 Chrysler parts cars have bad trunk floors due to gasket leakage, there are no open drain holes.

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300]
Sent: Thursday, September 07, 2017 10:14 AM
To: Chrysler 300 Club Int. Server <chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] 61 300G

Hi All,

I just washed my 300G for the first time and ended up with pools of water in the trunk. I didn't see any drain holes around the trunk lid lip for drainage. Is the rubber molding supposed to keep the water out, in other words water tight?

Thanks,
Mike 300G Barn Find

__._,_.___

Posted by: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___