|
Thank you for all the replies. Customs are always a choice (an expensive choice) and was wondering about off-the-shelf ones. The 10:1 piston is not a problem as various expedients such as the range of head gasket thicknesses alone allows some fine tuning. With Mopar's head spacer package P4529099 the .060 shim drops it about a full point. With an engine that will be at less than 10:1 static compression and won't be raced, are cast pistons sufficient? What results have people gotten from using Egge pistons? I know there has been mention of some people using them. As far as Rebuilder's Choice has anyone used them and what was the experience, good, bad, indifferent? Looks like Rebuilder's choice may have some connection to Kanter If I need new pistons and cast pistons won't do, so be it. I'll have to either go custom or find some alternative. __._,_.___ Posted by: "Richard Vitek" <rpvitek@xxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap