Good advice - I'll try it, Ray! Thanks, Keith Sent from my LG Phoenix 3, an AT&T 4G LTE smartphone ------ Original message------ From: Ray Jones 1970hurst@xxxxxxxxx [Chrysler300] Date: Fri, Mar 9, 2018 11:23 PM To: keith_a_lang@xxxxxxxxx;Ray Jones; Cc: Listsaver 300 Club; Subject:Re: [Chrysler300] Later model (300K) ignition switch tumbler. Hi Keith; You may be working on the wrong end of the problem. Might be just that the starter is not disengaging. Could be the Solenoid is sticking and holding the drive gear and contact internally. Unplug the signal wire (the wire from the Ing. switch) from the solenoid, and use a jump wire from the Battery to engage the starter. Remove the jumper and see if the starter stops. If it doesn't, the solenoid is the problem. Let us know how it works out. Ray On Fri, Mar 9, 2018 at 8:26 PM, 'keith_a_lang@xxxxxxxxx' keith_A_Lang@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
-- Ray Jones. Y'all come on down an see us. Ya hear?
__._,_.___ Posted by: "keith_a_lang@xxxxxxxxx" <keith_a_lang@xxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |