Hi Everyone. Started My D after its winter lay up and had no power assistance for the steering at all. It was fine when parked last October but had not been run since. The fluid in the pump looked slightly discoloured but not too bad I have removed the pump and cleaned it out and that seems ok, the power steering pipes were new when fitted in 2011 and are clean I have cleaned out the valve body on top of the steering box. Now when started I have good assistance turning to the right but nothing turning to the left. Can anybody advise on what maybe causing this? Regards Dave. ------------------------------------ Posted by: David Barlow <barlowdavidt@xxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/