[Chrysler300] Fwd: Unable to deliver your message

---------- Forwarded message ---------
From: Yahoo Groups <notify@xxxxxxxxxxxxxxx>
Date: Tue, Jul 17, 2018 at 2:44 PM
Subject: Unable to deliver your message
To: <russ300@xxxxxxxxx>

We are unable to deliver the message from <russ300@xxxxxxxxx>
to <chrysler300-noreply@xxxxxxxxxxxxxxx>.

Your message was sent to a group that does not exist. Please check
to make sure you spelled the group name correctly.

For further assistance, please visit http://help.yahoo.com/l/us/yahoo/groups/original/members/forms/general.html

---------- Forwarded message ----------
From: Russell Vaughan <russ300@xxxxxxxxx>
To: Chrysler300-noreply@xxxxxxxxxxxxxxx
Cc:
Bcc:
Date: Tue, 17 Jul 2018 14:44:14 -0400
Subject: Various parts for '60 - '64 Chryslers

After over ten years, I have decided to finally be able to actually put a whole car in my car trailer as opposed to various parts from dozens of cars. I have parted many '61 through '64 Chryslers over the years and have various parts from those cars. I also have some new parts that were never installed. Nothing to do handstands over, but parts that could come in handy should you need them. I can send pictures through a smartphone or an email sent directly to me at - russ300@xxxxxxxxx! Shipping will be at cost from 01915. I plan on attending the meet in September. I will gladly bring any purchased parts to the meet. Initially, I have some small parts, but some others are big.

First: a pair of PDQ 2-4800 rear axle universal joints $10 each, $15 for the pair. 2: Pinion seal CR 18891 ($10) and SKF 18912 pinion seal ($20). Both for $25. Raybestos H1157K 11X3" Bendix brake shoe hold down kit $3 "62 outside remote rear view mirror complete with cables and dash mount for toggle. $50. Non-remote rear view mirror 2275015. No tilt base for L or R side. No pits, just normal wear. $40. Inside rear view mirror for '63/4. Exceptionally nice head, pitted shaft. $25. Single power window switches for rebuild $10 pr. Fuel level sensor. I cannot verify accuracy but it did respond to a ohm meter $10 Chrome front door ash tray/lighter/PW switch Nykr '64 ('63?) $25/pr '60 - '63 bucket seat back springs $6/pr, '63-'64 Chrysler door handles and window cranks. - '63-'64 #6 Newport standard handles, 4 NY door handles LH side, 2 RH side 1 single handle $25 for all! - Cardboard light diffuser for pushbutton heater and transmission controls (pr) $5 Stainless headlight retainer rings $5/pr OEM Temp and oil pressure gauge senders $10/both. Pass side (?) front engine mount shield cleaned and repainted but driver quality only $5 Pr '62 Fuse box cover $5 Five pair front ball joints. 1 set LWB 3/4 nut, 4 sets 5/8 Premium brand Moog etc. Might be missing a nut or cotter pin or a spot of rust on the base from being out of the boxes, $40/pr Sell ALL for $150. Last, for now, a full set of ARP head bolts that were installed and torqued but never ran. Short bolts have Turquoise paint on the heads. Retail for $132, sell for $80. That's all folks! - for Now!