Re: [Chrysler300] 1961 Chrysler 300 G

Yes, I do have power seats and I do have the covers already installed on both seats. This piece is bigger (6") and has a curve in it.

----- Original Message -----

From: Lindsey

To: Michael Ashmore

Cc: Chrysler 300 Club Int. Server ; Don Verity

Sent: Wednesday, October 10, 2018 4:16 PM

Subject: Re: [Chrysler300] 1961 Chrysler 300 G

Does your car have power seats? If so, the seat switch mechanism may be covering the cut out on the one installed on your car. Sounds like the cut out for the switch if same as an F.

Sent from my iPad

On Oct 10, 2018, at 4:54 PM, 'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi There,

I am trying to figure out an extra piece of plastic that I found in the trunk of my 61 300G. It's the same kind of thin plastic that surrounds the front seats to hide the seat mechanism. I have both of those. It's about 19" long and about 6" wide with a distinct hole cut-out about 2" in diameter in the upper part. The piece is curved with a couple of fastener holes on the top flange.

Any help would be appreciated!

Thanks,

Mike 300G

__._,_.___

Posted by: "Michael Ashmore" <michael.ashmore@xxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___