Re: [Chrysler300] 1961 Chrysler Trunk Emblem Reproductionswhere
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1961 Chrysler Trunk Emblem Reproductionswhere





Apparently, I led some sort of a charmed life back then when it came to car stuff.  I not only had no problems with EM, but I also did quite a bit of buying from 
Frank Mitchell and never had a problem returning stuff for full refunds.  Apparently that was the exception, rather then the rule with everyone else.

Pete

-----Original Message-----
From: Keith Langendorfer keith_A_Lang@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: John Lazenby <french_fryguy@xxxxxxxxx>
Cc: Peter Fitch <pffkllc@xxxxxxx>; Val Jeffers <edward1108@xxxxxxxxx>; RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>; Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>; Mister Michael <milwaukee241@xxxxxxxxx>
Sent: Fri, Feb 15, 2019 6:56 pm
Subject: Re: [Chrysler300] 1961 Chrysler Trunk Emblem Reproductionswhere

 
Folks

This is indeed Interesting. I have George’s “Killer K” engine that will go into my 4 speed car after Dominic Rinaldi’s refresh but I am wondering what the status is of his 300J?

I believe his son has it now?

Keith 

On Feb 15, 2019, at 6:36 PM, John Lazenby french_fryguy@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 
Pete,

I read your post with interest as I've had experience with Emblemagic too.  At the time I was searching for a 300F piece for the center of my grill and I knew that EM offered them.  Somehow I had a conversation with George and he had ZERO kind words for them but I went ahead anyway as I needed one.

When it arrived it was terrible and I contacted EM and they couldn't understand the issue.  They did take it back but hit me with a heavy restocking charge.  Fortunately I located a very nice one later but never installed it.  The car was sold and somewhere around here that badge is hiding.

For those of us who knew George we certainly knew how he could be if he didn't like someone or some company but in this case for my experience he was 100% correct.  I miss George and those late night long phone conversations we had..

John Lazenby



From: "Peter Fitch pffkllc@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Val Jeffers <edward1108@xxxxxxxxx>
Cc: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>; Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>; Mister Michael <milwaukee241@xxxxxxxxx>
Sent: Friday, February 15, 2019 2:26 PM
Subject: Re: [Chrysler300] 1961 Chrysler Trunk Emblem Reproductions

 
The originals were the plastic emblems.  They were reproduced by an outfit in Ohio called Emblemagic.  The club decided to have the decals made in part because they were cheaper and in part, if the truth be told, because George didn’t like Emblemagic.  
     When I took my newly restored G to Don Cole’s meet in Pennsylvania, George complimented me on the car in general, and on the rear deck emblem in particular, not know its source.  He the got up at the business meeting and lambasted Emblemagic as producing nothing but crap and said we shouldn’t buy anything from them.  Of course I didn’t tell George that the emblem on my rear deck came from Emblemagic.
Regards to all,
Pete Fitch

Sent from my iPhone

On Feb 12, 2019, at 12:46 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 
So the red,white & blue emblems are a hard plastic ? I have a decal to replace G deck lid. Which is correct ?

                     Thanks,

                     Val


Sent from Yahoo Mail for iPad

On Monday, February 11, 2019, 10:11 PM, RICK AND DEBBIE CLAPHAM rixpac@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 
They look great, still need the silver/chrome accents.


From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Mister Michael milwaukee241@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Monday, February 11, 2019 7:13 PM
To: Chrysler 300 List
Subject: [Chrysler300] 1961 Chrysler Trunk Emblem Reproductions
 
 
Came accross the gentlemen on Facebook, which is a social networking site, who is reproducing trunk emblems for 61 Chryslers:  

His email is: vitkay@xxxxxxxxxxx 

“Hey guys, I'm making trunk emblems for 61 chryslers, $100 for a blank clear lens, $125 for the silver, gold or tinted red lens.  $150 for the 3 colour 300 lens.  The LED light kit is $25.  Makes for a cool 3rd brake light.  All prices are in Canadian dollars and do not include shipping from Vancouver BC.  PM me with any questions.  Thanks for looking. “





__._,_.___

Posted by: <pffkllc@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.