Re: [Chrysler300] 55-56 intake mannyfold question

["royjrdaniel royjrdaniel@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

It is sloped.  The 55 and 56 hemis had a good tilt on them to fit the distributor under the body seam on the firewall 

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------

From: "paul paulholm@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>

Date: 3/2/19 12:37 PM (GMT-05:00)

To: Chrysler 300 List <chrysler300@xxxxxxxxxxxxxxx>

Subject: [Chrysler300] 55-56 intake mannyfold question

Ran across what sure looks like a 55-56 vintage intake
mannyfold.
It has a square carb mounting base and small holes.

Do any of the 300 intakes of that vintage have what I would say
was a staggered mounting, the back carbby sitting higher then the
front carbby?? What I picked up (to test) was/is cast iron
rather then a reproduction or after market aluminum intake.

All I know for sure is that an automotive version for the 57-58
intakes is that both carbs sit on the same plane, and the holes
for the carb throats are bigger then the mannyfold in question.

thanks

--
Paul Holmgren
"The apparent lesson of the Inquisition is that insistence on uniformity
of belief is fatal to intellectual, moral and spiritual health."
-The Uses Of The Past-, Herbert J. Muller

__._,_.___

---

Posted by: royjrdaniel <royjrdaniel@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___