Re: [Chrysler300] 57 U joint rear

["dverity@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Bernbaums used to have them a long time ago. I doubt they have any now. If the caps with the tabs are still good, you can get a regular joint and reuse them.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Tuesday, March 12, 2019 10:57 AM

To: list server

Subject: [Chrysler300] 57 U joint rear

 

 

Hi,  surprisingly, none available at NAPA ,Rock or ebay ; this is the smaller joint with two caps that have wings for the 4 bolts, rollers are integral in the wings , no U bolts or snap rings on the half that bolts to 8 3/4 axle flange .

 

Anyone have one or a cross to a valid source? Thanks, john

__._,_.___

---

Posted by: <dverity@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___