Re: [Chrysler300] 64 tilt wheel

["Scooter465@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi believe it or not these GM built

Steering columns were still used

In the 1980s. I had a few 1981-82

Imperials with this design. Difficult

To repair and tear down. I remember having to make a puller to depress the lock ring to take apart the upper column.

Bob Haag

Sent from my iPhone

On Apr 1, 2019, at 12:43 PM, Larry Jett LarryWJett@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

RE:  GM supplied tilt-wheel for 1964 Mopars.  Indeed, Rich Barber and myself wrestled both intellectually and physically with that weird setup.  I even hand made a pulling device to free some part of the upper structure in order to reach the insides.  The turn signals bulbs are switched via a boudin cable that has been reproduced by some GM.  Rich, are you out there on this? Did you ever get it to work?

On Mon, Apr 1, 2019 at 5:41 AM 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I am interested to hear from anyone that has

worked on the tilt steering wheel that came out in 1964.

You know.......stuff such as 

Did you have turn signal problems?

Did you disassemble the steering column head?

How did you fix it?

Given the lack of information in the service manuals on this,

I'm assembling as much as I can to make up

a fix&repair guide.

Thanks

Hiho

Bob

__._,_.___

---

Posted by: scooter465@xxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___