On Saturday, April 6, 2019, 8:02 PM, Scooter465@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
This may be a Glassal creation.
Sent from my iPhone
On Apr 6, 2019, at 7:16 PM, 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
Bonham's did a nice job at hiding the fact that the car is a fabrication. The headline should not say that it is a convertible. They are being disingenuous.They should pull the auction. Otherwise, they are inviting a law suit.Ron
Gloria,
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Lyons john@xxxxxxxxxxxxxx [Chrysler300]
Sent: Saturday, April 06, 2019 6:13 PM
To: Gloria Moon
Cc: John Holst; *300-Chrysler 300 Club
Subject: Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams updateLooks like they used portions of this.At the very bottom on the web page for the car. Lots of scrolling required.
John LyonsSent from my iPhone 9x plus on the Nynex network..
On Apr 6, 2019, at 3:35 PM, Gloria Moon agmoon300@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:Hi follks,This is what the club officially said about this car.Hi Gregory,We do appreciate your willingness to investigate the authenticity of the car in question. The Chrysler 300 Club International, Inc. Board has issued our response below. We ask that you either use it in its entirety or not at all. We think that should alleviate any misunderstandings on the part of a potential buyer."Bonhams, with assistance from the Chrysler 300 Club International, understands that it is now most likely that this vehicle was refashioned as a convertible sometime in or before the 1980s. Chrysler Corporation's Microfilm shows the VIN tag 8403129575 was original to a Black 300F Coupe built on or around February 15, 1960. It should be further noted that the Code Tag is stamped in places, rather than pressed, showing it has been altered. The Chrysler 300 Club International Inc cannot verify that this car is or ever was a Chrysler or a 300 or a convertible from the information given. Bonhams urges bidders to inspect the vehicle accordingly. It is sold ‘as is."Gloria Moon
On Sat, Apr 6, 2019 at 12:58 PM John Holst jholst@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:The car is listed on line at the Bonhams auction. It does mention an amendment with the help of the Chrysler 300 Club. It appears that this is the only change to the listing and the prices are still pretty high and states it is one of a few CV produced that year. The display page can be seen at:
https://www.bonhams.com/auctions/25593/lot/515/
John Holst...
On 4/6/2019 11:16 AM, John Lyons john@xxxxxxxxxxxxxxx [Chrysler300] wrote:Hi Club,
Also, I met with a Bonham’s representative yesterday about the cut convertible they are selling. They are adding an addendum to the on-line description and have a revised estimate (I’m not sure they are posting that) of $80,000 I think.
Seller (obviously) had no idea they owned a cut car and was very disappointed to find out.
Regards,
John
__._,_.___
Posted by: Val Jeffers <edward1108@xxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
__,_._,___
- References:
- [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: John Lyons john@xxxxxxxxxxxxxx [Chrysler300]
- Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: John Holst jholst@xxxxxxxxx [Chrysler300]
- Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: Gloria Moon agmoon300@xxxxxxxxx [Chrysler300]
- Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: John Lyons john@xxxxxxxxxxxxxx [Chrysler300]
- RE: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]
- Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- From: Scooter465@xxxxxxx [Chrysler300]
- Prev by Date: [Chrysler300] 63-64 front/rear bumper guard w/pad for sale
- Next by Date: [Chrysler300] 1961 300 G For Sale
- Previous by thread: Re: [Chrysler300] Question regarding 300F hood stamping and Bonhams update
- Next by thread: [Chrysler300] 63-64 front/rear bumper guard w/pad for sale
- Index(es):
Back to the Home of the Forward Look Network Archive Sitemap