[Chrysler300] 1960 "F" Generator

["Michael Reed rmreed@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

The generator/alternator shop says the armature on my F's generator is shot - shorted out. Unrepairable. Do any of you have a source for a generator, or a generator for sale?

Second question: the shop says F's manufactured late in the prouction year had alternators installed. I've never heard that - any truth to it?

Mike
Women with a little extra weight tend to live longer than men who mention it.

On Aug 29, 2019, "rob bohuslav sonoramic413@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

https://itstillruns.com/test-fan-clutch-5086903.html

On Thu, Aug 29, 2019 at 4:20 PM rob bohuslav <sonoramic413@xxxxxxxxx> wrote:

Viscous fans only limit how fast the fan spins in relation to engine RPM...... There are Thermostatically controlled viscous fans which also "lock up" or "tighten up" the drive of the fan related to temp. If the fan clutch has a spring in the center of it, its a thermostatically controlled fan. If not, its only a viscous fan. If a fan clutch goes bad, typically it will appear to be real loose, and may even appear to not spin in relation to the engine, if at all, at idle.. If the fan "freewheels" and has very little if any resistance (engine off of course)...... the clutch is probably bad.

On Thu, Aug 29, 2019 at 2:10 PM williamgrogan2002@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Do I understand correctly that once the engine is hot the fan should become more difficult to spin as the fluid inside the clutch becomes more viscous?  Seems like mine stays rather easy to spin when stone cold or after running for some time.  Asking because the car seems to run warmer than it used to (not hot, just warmer).

Bill

Just east of the Gateway Arch.

__._,_.___

---

Posted by: Michael Reed <rmreed@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___