Re: [Chrysler300] rheostat 1964

["Marshall Larson granitledge@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

To likely repair your switch check out the wiper (contact to the rheostat) because it probably deformed due to heat.  It should only touch at the V shaped end of it.  If it is more than that then bend it to correct the angle.

On Sun, Mar 29, 2020 at 6:42 PM Marshall Larson <granitledge@xxxxxxxxx> wrote:

What is the shape of the headlight stem? If it is a triangle them I strongly suspect that a NAPA part #HL6571SB is the proper new switch.  I got that number from Bob Merritt.

On Sun, Mar 29, 2020 at 4:11 PM Harry Torgeson torg66@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hi group, I need help finding a headlight rheostat, my mechanic cleaned my current one but the results are dim interior lights at night, so I'm going to replace it.

Thanks in advance

Harry

--

Marshall Larson

--

Marshall Larson

__._,_.___

---

Posted by: Marshall Larson <granitledge@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___