Re: Re[2]: [Chrysler300] 1964 intake manifold silencer pads

Thanks Bob, I just read that article about the G with no fins. A couple of years ago I meet the son of the late owner of Lamb Chrysler Plymouth Dealer where that G was purchased. When I showed him photos of my G he remembered his father ordering that 300G back in 61' for a Doctor in West Warwick. He remembered how cool a car that was. He was a child at the time. Then he offered to buy mine, but I said no.

-----Original Message-----
From: Bob Merritt <bob@xxxxxxxxxxxxx>
To: Michael J Falcone <mjf175@xxxxxxx>; Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sat, Apr 11, 2020 6:50 am
Subject: Re[2]: [Chrysler300] 1964 intake manifold silencer pads

Issue 33 of the ENews shows the restored G.

See http://www.chrysler300club.com/newsletter/33/33.html

As background to that picture is the story of fins-nofins-fins

http://www.chrysler300club.com/newsletter/33/gg/1.html

------ Original Message ------

From: "Michael J Falcone mjf175@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>

To: cv300g@xxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx; dave.dumais@xxxxxxxxx

Sent: 4/10/2020 6:24:13 PM

Subject: Re: [Chrysler300] 1964 intake manifold silencer pads

Dave, could post that picture of the G with no fins from RI on the Facebook page? I am interested in seeing it. Some of my family is from the area where that Doctor lived and bought cars from that Chrysler dealer where that 300G was purchased. Thanks.

-----Original Message-----
From: Charlie V cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler 300 List <chrysler300@xxxxxxxxxxxxxxx>; Dave Dumais <dave.dumais@xxxxxxxxx>
Sent: Fri, Apr 10, 2020 6:03 pm
Subject: Re: [Chrysler300] 1964 intake manifold silencer pads

Hi Dave,

Bill Rolik has these pads for sale.

When on the site go to ENGINE, then on page 5 or 6.

Bill Rolik Enterprises - N.O.S., Reproduction, and Replacement Chrysler Parts

<t!>

Bill Rolik Enterprises - N.O.S., Reproduction, and Replacement Chrysler ...

Bill Rolik Enterprises carries NOS, reproduction, and replacement parts for Chrysler, Plymouth and Dodge vehicle...

Be careful, be safe and be well and have a Happy Easter.

Charlie Valentine

On Friday, April 10, 2020, 12:17:04 PM EDT, Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi guys,

Due to current conditions, I now search thru parts inventories.

I found a set of NOS silencer pads for the single 4 bbl

413.

I Remeber removing them when installing Edelbrock manifold.

Does anyone know if they are still available.

I also came across a picture of a 300 from RI, that the Dr had its fins removed.

But still had pieces back in his garage, late 70's photo.

Thanks, let's all pray that this too will end well.

Dave