Re: [Chrysler300] torsion bars and sway bars 300 K

["charlies@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Another area you may want to check are the front strut bars. I took a factory sway bar off a 62 Windsor and put it on my 62 Sport 300 which came without a sway bar. The struts in the Windsor were of a larger diameter.

Charlie in Ottawa

 

On 2020-05-15 9:02 pm, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] wrote:

 

I notice in the parts book that there are two different grades of torsion bars, one pair with and the other without the sway bar. I am going to be installing a sway bar on my 64 K  VC2 with the 610/611 bars.

 

Ha anyone had occasion to have installed a sway bar on anything other than the 300 K ram with the performance suspension upgrade installed? And own or driven a ram car with the with the performance suspension upgrade factory installed?  These bars are the 606/607 heavy duty. Is there a noticeable difference?

 

My front end is now apart is why I ask, so now would be the time to make any change.

 

Curios, the parts catalog shows the 606/607 heavy duty available for the 1964 Plymouth/Dodge models as well.

 

Thanks!

 

Al

 

__._,_.___

---

Posted by: charlies@xxxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___