Re: [Chrysler300] Cam Specs for 1958 300D

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Long cam discussion on club web site , by George himself, thanks to mr Merritt ; look there. ,
John 
Ps, Dave ,I have not lost interest but my body has . Driving me crazy . No more stealing 354 industrial hemi ( with solids) out of a junkyard over 8 fort RR tie wall by hand at night with a small 15 yo Helper , a 4x4 and ropes . I did that , carried it home too , in pieces . Block assembly  was VERY hard to do .. 
ended up in a 54 Ford 2dr 
Sent from my iPhone not by choice 

> On 20 May 2020, at 1:22 pm, finsruskw@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> Larry, 
> 
> Back in ’93,  when I did the engine for our Aztec Turquoise D, George
> steered me right to Isky Cams in Gardena, CA.
> 
> The code for the ¾ race cam was D-800, that is what I got and the cost was
> $90 + S&H
> 
> In my notes there is another # for full race and it was D-888 @ $108
> 
> The phone number at that time was 213-770-0930. Attn: re-grind dept
> 
> The lifters I got from George and they were $53 at that time.
> 
> Hope this helps in some way.
> 
> 
> 
> PS: I have yet to fire the engine, it’s still on the stand!
> 
> Just call me Randy Thorne I guess
> 
> I would sure like to sell it as I have all but lost interest in my cars at
> this point in life.
> 
> 
> 
> Dave Schwandt
> 
> 
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of
> Larry Jabin larry@xxxxxxxxxx [Chrysler300]
> Sent: Wednesday, May 20, 2020 11:05 AM
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] Cam Specs for 1958 300D
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Could someone please direct me where I could find the stock Cam Specs for
> the 300D
> 
> 
> 
> Thank You
> 
> 
> 
> Larry Jabin 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> Posted by: <finsruskw@xxxxxxxxxxxxxxx>
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/