RE: [Chrysler300] '57-'58 washer nozzle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] '57-'58 washer nozzle





Considering the limited surface area, as well as the frequency that these holes clogged up, I have no clue as to why they would do this, I assume, with two smaller holes, rather than one larger one. I can't find a part number for the chrome nozzle in my 55-8 parts book.
 
Ron


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Larry Jabin larry@xxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 7:48 PM
To: Ron Waters; '300 Club Group'
Subject: RE: [Chrysler300] '57-'58 washer nozzle

I found the email from Gary ↓

Hi Larry,

I do have this valve part #687 $25.00. I will try and take a decent picture to show you how it's attached to the firewall. It won't be until later this afternoon sometime. ( I can't make the #687 until late this week. I don't have one in stock).

The nozzle on the hood on a '57 has 2 holes, a '58 has 4 holes. The sizes are about the same

there isn't any smaller ones. They are about the same. You just end up with a little gap.

Thanks,

Gary

Thank You

Larry Jabin

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 4:39 PM
To: Larry Jabin <larry@xxxxxxxxxx>; '300 Club Group' <chrysler300@xxxxxxxxxxxxxxx>
Subject: RE: [Chrysler300] '57-'58 washer nozzle

 

Hmmm...not seeing that in the parts book. It lists the same Windshield Washer package for 57 and 58.

My 58 Ply has the nozzle with two holes. I've never seen one with four. Anyone else seen one of those ?

Ron


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Larry Jabin larry@xxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 7:21 PM
To: Ron Waters; '300 Club Group'
Subject: RE: [Chrysler300] '57-'58 washer nozzle

Hey Ron

The single squirter that go on the hood for 57 & 58 look the same until you look real close

57 had 2 squirter holes & 58 had 4

Per Gary Goers

Thank You

Larry Jabin


From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 4:15 PM
To: '300 Club Group' <chrysler300@xxxxxxxxxxxxxxx>
Subject: RE: [Chrysler300] '57-'58 washer nozzle

 

57-8 used the same squirter, in the center of the hood. 59 had two squirters installed in the air intake vent, near the windshield.

Ron


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Larry Jabin larry@xxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 4:38 PM
To: Ronald Kurtz; yahoogroups
Subject: RE: [Chrysler300] '57-'58 washer nozzle

Does it have 4 squirter holes or 2

I think  1957 had 2 1958 had 4

Thank You

Larry Jabin



From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Ronald Kurtz mark6268@xxxxxxxxxxxxx [Chrysler300]
Sent: Friday, May 22, 2020 1:24 PM
To: yahoogroups <chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] '57-'58 washer nozzle

 

Hello, everyone:

I have a windshield washer hood-mounted nozzle from a '57-'58 300 that someone in club could use. The pot metal is slightly pitted but restorable. Free. First come, first served.

Best,
Ron Kurtz
E #292



__._,_.___

Posted by: "Ron Waters" <ronbo97@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.