Re: [Chrysler300] 1955-6 Eaton Power Steering Pump Cover Gasket

["'Gary Nelson' gnelson@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi All,

I have one cap seal left over from when I was selling parts. $6 including ship cost. Also, I have 2 or 3, 55/56 very good complete generator /pump cores. I received then very clean and turn over nicely. I am sure pump will work, gen. may only need brushes or not. One is GJC 7003C, P/N 1642008, other GJC 7003A, P/N 1642007.  $100 including packing that heavy item, + shipping.

 

Take Care,
Gary

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Wednesday, June 17, 2020 10:18 AM

To: '300 Club Group'

Subject: [Chrysler300] 1955-6 Eaton Power Steering Pump Cover Gasket

 

 

Hey Everyone -

 

I've sourced the 55-6 Eaton power steering pump cover gasket. As it turns out, it's the same as on Ford Mustang, which also used an Eaton pump. Here's a vendor on ebay that sells the gasket for a good price. Note: I don't know if the other two O-rings are used on our pumps. Maybe someone can chime in on that.

 

https://www.ebay.com/itm/324197377740

 

Ron

__._,_.___

---

Posted by: "Gary Nelson" <gnelson@xxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___