RE: [Chrysler300] 300 K engine dipstick placement

["'william ELDER' belder@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Allen:

 

The dip stick tube does not go through the motor mount but the clip is secured to the rear mounting bolt of the motor mount.

 

300ly

bill

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300]
Sent: June 17, 2020 10:47 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300 K engine dipstick placement

 

  

I think I know the answer to this question already, but I have to ask. 

When I removed the dipstick tube, I was cussing because it bent up upon removal before I removed the sunk engine mount. 

This was because i t ran through the engine mount! It was always hard to slide the dipstick in and out as well. 

Now, with new motor mounts in, it appears that it is a straight shot down behind the mount. The clip would mount on the rear bolt on top of the heat shield it appears. 

My 300 K has AC and power brakes so it is crowded on the left side. An AC muffler is right there. 

Tell me it it really isn't supposed to go through the mount! 

 

Al 





[Non-text portions of this message have been removed]



------------------------------------
Posted by: "william ELDER" <belder@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/