RE: [Chrysler300] C300/300B seatbelts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] C300/300B seatbelts





Pretty sure the holes and nuts are already there—the hole and nut plugged with a rubber plug.  Just use the standard seat-belt bolt.  May or may not be set up for three belts but seems OK to tether the center belt (if used) to the center bolts for the outside belts.  That was the design for our ’64 300K convertible.  Plugs and holes are readily visible with lower cushion out.  May want to chase the threads before inserting the bolts.

 

Rich B.

Brentwood, CA (Thrashing at the leash)

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Ronald Klinczar rjklinczar@xxxxxxxxx [Chrysler300]
Sent: Wednesday, July 1, 2020 3:55 PM
To: jackcboyle@xxxxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] C300/300B seatbelts

 

 

I would like to install seat belts in the back seat of my 300 and am also interested in this drilling concept.   I am apprehensive that a drilled non threaded hole would provide support.

 

Ron Klinczar

65 300

 

On Wed, Jul 1, 2020, 5:33 PM jackcboyle@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Group,

 

From 1969 til last year I was using junk yard belts in my C300.

 

I am getting ready to drill the floor of my 300 for new seat belts. All of my seats and upholstery are out and in storage.

 

Does anybody have floor mounted belt photos they could share for locations?

 

In addition, which length lap belt is suggested? 60” or 74” are the options.--- I assume 74” for floor mounted.

 

Thanks  …Jack

 

Jack C. Boyle

913 544 4650

 



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.