|
The valve stems supplied by America’s Tire when I bought the set of 201 x 14/75R narrow WSW tires just barely protruded through our K’s wheel covers. I bought and installed the shortest set of extenders I could find, they stick out too far and are 1-1/2” oerall length. Perhaps these are !’ nominal. I searched for but could not find shorter extenders but recently saw an ad for ½” extenders at an atrocious price. In checking these lengths today, I noticed the wheel covers have started their walk—even with bumps. Rich Barber Brentwood, CA From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of nick@xxxxxxxx [Chrysler300] Looking for wheel valve stems to fit a 300K with the original wheelcovers. Looks like they need to be at least 2 ½” long. I tried a cover on a wheel with a 2” stem and it’s just flush with the hole. I can’t find long ones except for metal ones and that’s a no no on these. What are people using? Extenders? I assume the factory must have used ones long enough to clear the wheel cover but it’s been so long since I had my ’64 300 I don’t remember. Nick __._,_.___ Posted by: "Rich Barber" <c300@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap