Re: [Chrysler300] 1962 300 Needs

["ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Try these pliers, they have worked great for me for many years. Will straighten the most bent up fins easily. From UK, but maybe someone else is supplying in the US.

On 08/15/2020 8:43 PM Charlie V cv300g@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I few months ago  I bought my sending unit from Vans Auto. The only problem is that It does not seem to be accurate. It seemed to only read from 1/8 to 3/4. My G is in the shop so when I get it back ( hopefully very soon ) I can fill up the tank and see what it reads. Then I might carry a 5 gallon can of gas when it just gets to 1/8 and keep running until its empty and see how the gauge reads.

As far as a radiator comb look on Amazon. They have many to offer. Just pick one you like.

Hope this helps.

Charlie Valentine

On Saturday, August 15, 2020, 09:24:28 PM EDT, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Two questions, for suggestion, if any....

1. I wish to replace the Fuel Pick Up/ Sending Unit.  Any suggestions on who to purchase a correct one from?

2. I wish to buy a Radiator Comb to straighten up the fins on the Radiator and the A/C Condensor.  Any suggestions on where to purchase one from?

Thanks!

Matt Allyn

__._,_.___

---

Posted by: ALLAN POZDOL <apozdol@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___