Re: [Chrysler300] 1962 300 Needs

["'jholst@xxxxxxxxx' jholst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

The bend of the float arm needs to correct. To straight and it will hit top of tank and read 3/4 or there abouts. To much curve and it will hit the bottom of the tank when empty and also be incorrect since it may read 1/4 or so and leave you out of gas when the gauge still shows some left. Try measuring half a tank and play around with the float wire to show 1/2 full and hope for the best. Then try a few trips to see usage against gauge reading to see what should be in the tank. Read once that is why most 300 owners carry 3-5 gallons in a jug for emergencies.

John Iowa 300 K....

Sent from my iPhone, not my first choice.

On Aug 15, 2020, at 8:44 PM, Charlie V cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

I few months ago  I bought my sending unit from Vans Auto. The only problem is that It does not seem to be accurate. It seemed to only read from 1/8 to 3/4. My G is in the shop so when I get it back ( hopefully very soon ) I can fill up the tank and see what it reads. Then I might carry a 5 gallon can of gas when it just gets to 1/8 and keep running until its empty and see how the gauge reads.

As far as a radiator comb look on Amazon. They have many to offer. Just pick one you like.

Hope this helps.

Charlie Valentine

On Saturday, August 15, 2020, 09:24:28 PM EDT, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Two questions, for suggestion, if any....

1. I wish to replace the Fuel Pick Up/ Sending Unit.  Any suggestions on who to purchase a correct one from?

2. I wish to buy a Radiator Comb to straighten up the fins on the Radiator and the A/C Condensor.  Any suggestions on where to purchase one from?

Thanks!

Matt Allyn

__._,_.___

---

Posted by: "jholst@xxxxxxxxx" <jholst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___