[Chrysler300] 64 300 light switch

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

finally had time to remove inst cluster.

Compared originall light switch to new one.

I did notice that the copper tab that is on right lower side is corroded 

This moves up and down as dimmer / stem moves right to left.

Any chance that corrosion goes inside the sealed part of switch,  and causes inst lights to work when motor is running without use of headlight switch.

I did not have time to cut old switch apart and see if corrosion creeper into other spades.

This I will do after return to house. 

I also switched out the circuit boards.

Dave

Sent from Yahoo Mail on Android

__._,_.___

---

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___