Re: [Chrysler300] 1961 300G

["Andy Mikonis r41hp@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Bob is right in general. If the G doesn't have factory air conditioning it's easy. To Nick's point access is more difficult with air conditioning. I've dealt with both kinds.

Andy

On Oct 2, 2020, at 7:09 PM, Cox Scooter465@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

All you have to do to remove

Ignition switch is remove

The front bezel nut and the

Assembly will drop right
Down switch and ignition

Light assembly. It's only

Held in with the nut on the

Front of switch.

Bob Haag

On Oct 2, 2020, at 8:03 PM, chris nielsen commercialstunts@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

So I've never had an ignition key for this car. I tried like crazy to remove the ignition from the dash but was unable, I'm still dealing with a left hand injury now for over two years... It was very difficult to get it back in the dash at all...  Does anyone have any tips or ideas to make another key or something else work? I've tried many old chrysler keys with no luck. I know I can start it without a key but I will keep and drive it alot so I need an actual key. I could cram a screwdriver in there? Drill it out and hope to be able to put in a new one? Pay a locksmith $250.00 to come and make a key? Just thought I'd ask all you pros... Thanks in advance!

__._,_.___

---

Posted by: Andy Mikonis <r41hp@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___