Re: {Chrysler 300} 1962 Cab. Linkage Adjustment

["'Charlie V' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

To achieve an angle of 113 to 115 degrees you would be looking on your phone of an angle between 123 and 125 degrees.

Charlie

On Sunday, November 8, 2020, 06:55:30 PM EST, Ray Jones <1970hurst@xxxxxxxxx> wrote:

Hi Matt;

Do you have an Iphone?

Go to Utilities, click on it and open Measure.

At the bottom of the page there are 2 buttons, Measure and level.

Place the phone's edge on the pedal, and it will show you the angle.

45 Degrees will be the 135 you want.

The I-phone is one of the handiest tools you have now.

ot only the level, but it measures many ways, but  the camera is perfect

for seeing behind or under things  your old butt can't get to any more, and is priceless at the parts

store when you are trying to describe the stupid part you need.

Hope this helps, Ray

On Sun, Nov 8, 2020 at 11:56 AM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Trying to accurately adjust all of the linkage for the 4 barrel on my 383 for this 300 Sport.

I am good at following directions, accurately, but need advice on one step:

In the Service Manual....

http://www.jholst.net/62-service-manual/fuel.pdf

Group 14....

Page 14-43....

Step 5....

Anyone have a way they execute this measurement....?

DISCONNECT ONE END OF THE ACCELERATOR PEDAL ROD © .

ADJUST ITS LENGTH TO PROVIDE A PEDAL ANGLE OF 113° TO 115

I don't have a protractor and was always bad at math.

Thanks!

Matt Allyn

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/658490956.3077870.1604858180326%40mail.yahoo.com.

--

Ray Jones. Y'all come on down an see us. Ya hear?

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD72c-xKZGUw%3DV%2B6j%3DC2%3D%3DpRWzE2%3Dm2UrotaJ-WoOJ0r8mT_Qw%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/20483768.3186056.1604884732342%40mail.yahoo.com.