Re: {Chrysler 300} Pic of power steering pump

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

it may be because the factory design  is made loose , able to move or swivel on its pin — normally ; the belt sort of self tightens it .

If you do not know about that , it can seem impossible to tighten it . As if something is missing . Supposed to be a rubber block in there too, in the wedge place   ; Noel i do not see it . Often missing , it stops noises   . 

That said , kind of problematic design , soon dropped — as constant motion wears the hole in the mount egg shaped , soon pump axle and belt pulley is tilted. But it can limp along like that for a long while . 

This had a thread on here a few times . I once made a kit to mount it solidly , had to fix it on first F i ever owned . maybe 1970 .    

yes very confusing first time you see it. 

john 

Sent from my iPhone not by choice 

On 20 Nov 2020, at 12:35 pm, Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:

FYI - on my F -

Noel

<image.jpg><image.jpg><image.jpg>

Sent from my iPhone

On Nov 20, 2020, at 11:12 AM, 'Michael James' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



Hi Team, does anyone happen to have a picture of how the  power steering bracket and pump are mounted on a 300 F? Non a/c? The guy who is putting in the engine as confused as to how it mounts properly… Thanks in advance! 


Sent from Yahoo Mail for iPhone

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/759251354.301357.1605892356314%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F508092D-4B97-4D65-9875-B326CAA382CA%40comcast.net.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/59CEADAD-EF82-4B0E-BF95-27640D723563%40gradyresearch.com.