RE: {Chrysler 300} coolant Bypass hose on hemi , 392 some others (depends on front cover arrangement)

[Carl <cbilter@xxxxxxxxx>]

NAPA 7432 (or equivalent) is listed as the correct hose, fit on my 392 ten years ago.

 

Carl B.

 

From: John Grady
Sent: Thursday, February 25, 2021 5:00 PM
To: Chrysler 300 Club International
Subject: {Chrysler 300} coolant Bypass hose on hemi , 392 some others (depends on front cover arrangement)

 

I ran into some good stuff to share; I was looking for this preformed hose at the front of hemi from the  water pump to the thermostat housing that joins the heads. 

 

I could not find it anywhere , "obsolete" ----started cobbling up stuff, but then found out an AC Delco hose part # 14209S, GM # 88907206 is a U shaped 1" hose -------with this you get two 90 degree parts that fit ; cut in half you have two hemi hoses. 

 

awwright. 

 

John G

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABZ1P2DfTR5OpMsHC_Dzf%2B%3D0sZOzais5Kp3TWwvMdVHovf74pA%40mail.gmail.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6038465d.1c69fb81.8e5db.b5bdSMTPIN_ADDED_MISSING%40gmr-mx.google.com.