Re: {Chrysler 300} Important Feedback Needed For Magnetic Version of Gri
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Important Feedback Needed For Magnetic Version of Grille Badge



Tony,

I'll take one badge with 3M adhesive.  Mine will go on a belt buckle.

Thanks,

Dan Reitz
Bell Canyon, CA
Sent from my Sprint Samsung Galaxy S7.

-------- Original message --------
From: 'Anthony Rinaldi' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Date: 3/17/21 8:51 AM (GMT-08:00)
To: Justin I <captjj28@xxxxxxxxxxx>
Cc: Chrysler 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Important Feedback Needed For Magnetic Version of Grille Badge

Yes. The circular logo is done on one side of the coin which can be magnetized. 

Coin is 38mm. 
Badge is 60mm. 

Coin shown below:



Sent from my iPhone

On Mar 17, 2021, at 11:17 AM, Justin I <captjj28@xxxxxxxxxxx> wrote:


Just to be clear:  The circular logo design is off the table in favor of the gear design?  Thanks.



From: 'Anthony Rinaldi' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, March 17, 2021 10:45 AM
To: Chrysler 300 Club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Important Feedback Needed For Magnetic Version of Grille Badge
 
Hi To All who are interested in the magnetic version of the Grille Badge,

The custom emblem manufacturer only offers the threaded attachment or self adhesive permanent backing to be used to attach their emblems to a car while driving. Sticking these things on to the sides of our 300s is not an option. 

<image0.jpeg>


I am told that the proposed strong magnet version of the Car Grille Badge, that I previously showed, should only to be attached for shows and not while driving. 

Please “Reply All” with your feelings regarding the magnetic attachment emblem only being used “For Show” & not “For Driving.”

Once this discussion is complete, I will be asking for pre-orders that will not be binding and will not require any payment. 

Need to know what % of the minimum order of #100 Car Grille Emblems needs to be “studs” and what % needs to be “magnets. 

Need to know that we can sell most of the 100 that needs to be ordered. 

Also need to gauge interest in commemorative coin that can be optionally magnetized to attach to your dash or glove box cover. I will be sticking the magnet to the Club logo side and showing the 50th Anniversary side while my grille will be adorned with the Club logo. 

Since you can’t eat these things, I will need to be sure they will sell or else my 300-F  will be adorned with two of the most expensive “one off samples” of a grille emblem & a commemorative coin on earth. 

I found an optional strong rare earth magnet with self adhesive surface that can sell for $1.00 each to convert the coin so that it can be attached to your dash or glove box so that one side or the other will show.  Also an optional self adhesive anti scratch protective tape for the back of the magnetic version of the grille badge, a square piece can sell for $1.00. It is meant to attach to the car to protect against chips etc. Just stick it to back of emblem and trim to fit with Exacto Knife. It will protect your paint. 

<b057c47c-e3bc-4cf4-8404-c3bd4afd548d.jpg>

<af3ce398-e8b5-4618-b4db-39499541c06b.jpg>


Thanks for your feedback & support,
Tony

Sent from my iPhone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C895A2BD-E6CA-42D5-9793-9CF9CD42B296%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/60526961.1c69fb81.83f45.9f14SMTPIN_ADDED_MISSING%40gmr-mx.google.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.