Re: {Chrysler 300} Fw: 300F rear glass moulding.

[Jugle <lajugle@xxxxxxxxxxx>]

I believe the F's were made in two different plants. Detroit and Los Angeles, I believe.

L. A. Jugle, 300C conv

On 05/31/2021 3:00 PM Jean-Yves Chouinard <jymopar@xxxxxxxxxxx> wrote:

 

 

 

 

 

---

From: Jean-Yves Chouinard
Sent: May 30, 2021 10:30 PM
To: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Subject: 300F rear glass moulding.

 

Hi 300 fans.

I'm just curious as to why some 300F have a single joint at the rear glass upper stainless trim and some have three joints up there.

A running change or just randomly placing the two types??

Working on an F that has a SO # number of 0219 ( Feb 19) and it has a single joint in the upper trim.

My own F has a SO # of 0401 ( April 1st) and it has a three piece affair.

My G has a single rear joint trim...

Anybody know anything about this?

Thank you.

Jean-Yves Chouinard

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BN7PR06MB6419C17617D570BBDDA2E8EFAE3F9%40BN7PR06MB6419.namprd06.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/399792318.351233.1622559893551%40connect.xfinity.com.