{Chrysler 300} Seat foam

["D.C. Mason" <petergriffinforpresident@xxxxxxxxx>]

Hi-
We are removing the brittle crumbling seat foam from a set of seats and are wondering if anyone has a suggestion for foam sheet/block material for use in 63/64s?  Looks like about a 2” thickness, and the modern foam is available in a variety of densities.   Only the bottoms are hard and crumbling; the backs seem ok.  We are planning to remove the hog rings and then the whole seat bottom cover looks like it will slide off towards the front.  Didn’t see a tech article on the site about seats so any learned wisdom is appreciated.  
Thanks!

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/28D0E9A0-AD1C-47EF-AA8D-D7B727AF7D5E%40gmail.com.

Sent from my iPhone

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/28D0E9A0-AD1C-47EF-AA8D-D7B727AF7D5E%40gmail.com.