Re: {Chrysler 300} Transmission dip stick

John, welcome to the 300 addiction! The ram cars use a specific dipstick and tube for the transmission to bring the dipstick over to the side of where the carburetor is. My 300F stick is actually two pieces that are riveted together. I can take the measurements for you.

Nick.

On Fri, Jun 25, 2021 at 1:33 PM mguarneri via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hello everyone,

I am the new owner of a 300G convertible w/ A/C. I noticed that the transmission dip stick was welded and I am wondering what the exact measurements are from the tip to the stop, from the low mark to the high mark and from the high mark to the cap. (Being this is my first time reaching out, I hope I am doing this messaging to the group correctly.)

Many thanks....John

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1597184286.1582096.1624653207911%40mail.yahoo.com.