{Chrysler 300} Long Ram exhaust manifold question

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi Folks

The F I just bought back after 20years has an exhaust leak coming from the drivers side manifold. I had it repaired when I owned it way back when and you can see the large weld in the pic. Unfortunately, the little “ear “ on the flange has now broken and I’m guessing the only way to repair is to have a bunch of successive beads of weld on the cast iron but that may be nuts on my part?

Any thoughts on a short (summer car show season) and long term fix would be most appreciated!

Thanks!

Keith 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9514D853-FDD0-469A-BA57-77321DFCBA9D%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9514D853-FDD0-469A-BA57-77321DFCBA9D%40yahoo.com.