Re: {Chrysler 300} Part Needed

On Wed, Sep 15, 2021, 9:31 PM Keith Boonstra <kboonstra@xxxxxxxxxxxx> wrote:

Michael,
Do you have a photo of the broken one? I have at least one extra gen pulley, but don’t remember if they are one sheave or two sheave pulleys.
Send a photo and I will check it out next week after the convention.

Keith Boonstra

-

On Wed, Sep 15, 2021 at 10:47 AM Michael Reed <rmreed@xxxxxxxxx> wrote:
The generator pulley on my 1960 F is broken. I hope someone can provide me with a source or potential source for a pulley.

BTW - Atlas Obsolete doesn't list it as part they carry.

Mike Reed in Hastings, Michigan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/339c3238-ad09-49af-8b1e-ea12eff19623%40lakeo.org.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABYqBVoCyTDPFGfX8A7Eu4DrZmYRxbva_rFUNSyuGVkTXqxw5Q%40mail.gmail.com.