{Chrysler 300} 1960 383 Heat riser

["D.C. Mason" <petergriffinforpresident@xxxxxxxxx>]

Hello 300 friends,

Wondering if anyone knows how to tell what position is “open” on the heat riser.  On our 60 (Windsor) it doesn’t seem to change and I’d like to make sure it’s open not closed.  It moves freely, and still has the spring attached, but doesn’t move much on its own. I may temporarily wire it open, if you can tell by the counterweight when it’s open….?


Also for the 60 trunk photos, I don’t know if it’s the same on the F but it sure looks like our trunk is original (photo attached).  The rubber mat even has the mopar symbol.  Can send more photos if helpful…

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1FB0114E-50E3-4E3A-9DED-129246619F1B%40gmail.com.

Thanks!
dave & Kya

Sent from my iPhone

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1FB0114E-50E3-4E3A-9DED-129246619F1B%40gmail.com.